Energy saving tips of using water pump

Yibocommunal
1 min readMay 24, 2021

--

1. Shorten the line.
2. It’s not the type of “antiaircraft gun” outlet. Because the outlet pipe increases the energy consumption. At the same time, the pool had a pump.
3. Increase the diameter of outlet pipe as much as possible.
4. Remove the pipe blockage in time. Foreign matter left in the inlet, the impeller in the shell or split flow will be taken to save water.
5. As far as possible direct drive coupling, due to direct drive belt transmission efficiency coupling rate.
6. The filter can be removed on the premise of ensuring clean water.
7. Is carefully reviewed to prevent pump seals from entering the pump. If you pump the air, the water will be greatly reduced.
8. Can be used for no engine or electric motor, gasoline engine, conditional three-phase asynchronous motor, no single-phase asynchronous motor.

Related products:

Rotary vane vacuum pump in IGBT module manufacturing process

Sign up to discover human stories that deepen your understanding of the world.

Free

Distraction-free reading. No ads.

Organize your knowledge with lists and highlights.

Tell your story. Find your audience.

Membership

Read member-only stories

Support writers you read most

Earn money for your writing

Listen to audio narrations

Read offline with the Medium app

--

--

Yibocommunal
Yibocommunal

No responses yet

What are your thoughts?